Tornado系列三坐標測量機是LEADER公司21世紀一代移動橋式測量機。
Tornado series is the latest generation of Moving Bridge style high accuracy high speed Coordinate Measuring Machine from LEADER
Tornado測量機集單點探測和模擬掃描技術為一體的高性能檢測設備，可選配同時安裝接觸式和非接觸掃描測頭。基于新一代高穩定性控制系統，并與精度補償系統進行結合與優化，加上的算法，可實現高速、高精度模擬開環以及閉環掃描。
Tornado serials combines single-point probing and analog scanning in a single high performance measuring machine also can equipped with contact and non-contact probe system. Based on the new generation of controller combines and optimizes temperature and accuracy compensation systems and advanced algorithms to support high-speed, high-accuracy analog open and closed loop scanning.
?結構特點 Design Characteristic
- 固定花崗石工作臺，X、Z軸采用超高剛性航空鋁技術，通過減輕運動負荷從而提高了整機的性能，
是保證穩定性和剛性的結構設計。
- 測量機主導軌采用槽型截面設計，空氣軸承按封閉式靜壓導軌布局，增大了氣膜剛性，提高了Y向氣浮導軌的精度
- 高精度高氣膜剛性的自清潔式預載荷氣浮軸承-三軸均采用大功率驅動器、電機及新型雙級帶減速器，確保傳動準
確，迅速。
- 英國Renishaw進口光柵尺、讀數頭、測頭、測針、控制系統。
- 德國FESTO氣動系統Z軸氣動平衡，可靠、平穩提高定位精度，并具有自保護裝置，提高了Z向的運動特性。
- 日本SMC精密過濾系統，確保導軌長壽命
- 德國GATES柔性鋼絲同步帶傳動，克服了磨擦桿、齒輪齒條、鋼帶等傳動的諸多缺點，無滑差、噪音、高柔性
- Granite fixed worktable, X&Z axis beam has aviation aluminum technology. This structure is the best solution to lighten main carriage’s weight and improve main carriage’s stability and rigidity, so can greatly improves CMM’s performance.
- Granite worktable with integral “dovetail” guide in Y axis, eliminate the pitch and yaw ,also provides superior motion stability.
- Z axis air-balance with self-protection ,improve motion capability.
- Advanced synchronous belt drive system with non-slip and high stiffness, ensures high stabilit, lower noise.
- High precise, rigid, and pre-loaded air bearings on all axes, can ensure the guidance never be damped
- Transmission system uses high-power DC servo motor and new double level tape reducer to ensure rapid and accurate axes
- RENISHAW steel scale
- Famous parts from all over the world are used in every important sub systems
| 行程范圍(mm) Measuring Strokes | 外形尺寸(mm) Overall Dimension | 主機重量 (Kg) Machine Weight | 被測工件重量 (Kg) Max. Part Weight |
| X | Y | Z | Lx | Ly | Lz |
| 600 | 800 | 600 | 1200 | 1540 | 2440 | 800 | 500 |
| 精度指標：（根據ISO10360-2坐標測量機的性能評定標準）(Accuracy is according to ISO 10360 – 2) |
| 允許示值誤差MPEE (μm) Maximum permissible error of indication of a CMM for size measurement (μm) | 允許探測誤差MPEP (μm) Maximum permissible Probing Error (mm) |
| 2.2 + 3.3L/1000 | 2.3 |
| 動態性能Dynamic Performance |
| 3D運動速度(mm/s) 3D positioning speed | 3D運動加速度(mm/s2) 3D acceleration |
| 750 | 1800 |
| 測量機室溫度要求：Room Required Specifications |
| 房間溫度 (溫控間) Room Temperature | 18～22°C |
| 溫度梯度(時間) Temperature Gradient (in time) | 1°C /h |
| 溫度梯度(時間) Temperature Gradient (in time) | 2°C /24h |
| 溫度梯度(空間)Temperature Gradient (in the volume) | 1°C /m |
| 測量機室濕度要求：Humidity Required Specifications |
| 空氣相對濕度 Relative humidity | 55-65％ |
| 氣源要求：Air Supply System Required Specifications |
| 最小供氣壓力 Min. air pressure | 8 bar [0.8 MPa] |
| 耗氣量Air consumption | 0.12-0.45m3/min |
| 電源要求：Electrical requirements |
| 電壓Voltage | 220 V ± 10% |
| 頻率Frequency | 50/60 Hz |
| 耗電量 (Max Power consumption) | 1500VA |
| 電流Current | 15 A |
| 允許的的地面振動 Allowed Maximum Floor Vibration |
| 頻率范圍 (Frequency Range) | 0 ~ 19 Hz 19~75 Hz > 75 Hz |
| 振幅 (Maximum Amplitude) | 0.0011 mm 0.0011~0.002 mm 0.002 mm |
| 用電設備要求接地可靠：接地電阻小于4歐姆 A good earth ground (less than 4 W) is required for reliable operation of the electrical controls. |
備注：滿足環境條件要求的方法具體可參考《機房施工指南》
Note: The Site Preparation Guide will help customer to know how to reach the Room Requirements.
